As we move into the development and future of high-definition, the displays, components and cables are becoming more complex. HDMI™ (High-Definition Multimedia Interface) is the latest connection type available between components and displays to transmit a true digital signal of both audio and video in a single cable. HDMI™ is considered a very high-speed digital signal transmission medium that is capable of transmitting signals up to 5Mbps (5,000,000 bits per second).

In the new era of HDTV, an extremely high bandwidth requirement has caused significant limitations to cable length. It is very difficult to achieve a 1080p signal over a length of 4m, simply because twice as much information needs to get through (which is why 1080p gives such a sharp, vibrant picture). Manufacturing a cable to pass 720p/1080i is quite simple. IXOS® HDMI™ cables will pass 720p/1080i up to 20m without any noticeable difference in the picture. Every IXOS® HDMI™ cable will pass 1080p up to 7.5m (24.6ft.). To verify that all IXOS® cables perform to this high standard, every cable is tested using the Eye Diagram

Test with a Data Timing Generator and Time Reflectometer (TRD), as shown below. This is why there are track marks on every IXOS® connector - it has been plugged into the female receptacle for testing. It is impossible to test an HDMI™ cable without it being plugged in. These steps certify that every IXOS® cable will perform to the highest industry standard possible, earning our stamp of approval for IXOS®’ very own Certified TRU-HD™.

- Proprietary Nitrogen Gas-Injected Polyethylene dielectric provides maximum insulation and significantly reduces the

dielectric constant

- Triple shielding eliminates RF and EM interference

- Patented 4-layer PC board improves FEXT (Far End Cross Talk) by stabilizing impedance

- IXOS TRU-HD™ Certified High Definition 1080p Digital Video Transmission*

- Eliminates Audio and Video Digital-to-Analog conversions

- Silver Plated conductors for superior signal transfer