Panamax’s MR Family of products offers several layers of surge protection. Panamax’s patented Automatic Voltage Monitoring (AVM) technology continuously monitors the incoming power. In case of an undervoltage or brownout (too little electricity) or an overvoltage (too much electricity) a flashing red lightning bolt will be displayed and power to the equipment is automatically turned off. When voltage returns to a safe level, power to the equipment is automatically reconnected.
The other layer of surge protection Panamax offers is our exclusive Protect or Disconnect™ technology. This ultra fast protection circuitry completely protects your equipment from surges such as lightning. When overwhelmed with extreme catastrophic events, Panamax permanently disconnects AC power to equipment. All Panamax products offer this core protection technology.
Protecting a complete system may sometimes require that signal wires coming out of the wall be protected as well. Panamax has you covered there too. Universal ultra low-loss coaxial protection (as well as LAN/Ethernet) protection prevents signal lines from carrying damaging surges while maintaining full high-definition and high-speed Internet signals to your equipment for your connected life.
Exclusive Automatic Voltage Monitoring (AVM)
Panamax’s patent pending power monitoring circuitry constantly monitors the AC line voltage for unsafe voltage conditions such as momentary spikes, prolonged over-voltages and undervoltages (brownouts). These unsafe conditions pose a very dangerous threat to all electronic equipment within the home. If the MR4300 senses an unsafe power condition, it will automatically disconnect power from your equipment from the to protect equipment from damage. The front panel indicator will also alert users to the power condition. Once the voltage returns to a safe level, the MR4300 will automatically reconnect the power to the outlets.
Protect or Disconnect™ Technologies
In the event of a catastrophic surge such as lightning, it completely disconnects AC power to connected equipment.
Front Panel Outlet
MR4300 features a protected and noise filtered convenience outlet located on the front panel. Perfect for temporary gaming systems, portable electronics (such as music players or smart phones), or other personal electronics.
Front Panel Decorative Lights
Blue decorative lights add an attractive look at feel to your equipment rack or TV cabinet. Antenna, Cable, Sat and LAN Signal protection Coaxial protection circuits prevent damaging surges from entering through signal paths and have the smallest signal loss on the market - less than 0.5 db of attenuation from 0Hz to 2.2GHz. Our coaxial protection has been specifically designed to virtually eliminate signal loss. The clamping level of 75V will meet and exceed the demands of both cable and satellite voltages while minimizing exposure to damaging spikes and surges. LAN protection allows for 10/100 base-T Ethernet equipment to integrate into an audio/video system without the risk of upstream surge damage from a gateway, switch, router or other network device.
Eight Protected and Filtered Power Outlets (see specifications)
Eight Foot Power Cable with Low Profile Plug This 45° angle low profile plug allows your equipment to be as close as it can get to the wall outlet while not blocking an adjacent outlets. The 8’ power cord means your installation location isn’t restricted by wall outlet location. Don’t let your electronics control your lifestyle.
|Voltage Protection Rating (UL 1449 3rd Edition, 3,000A)||330V|
|Under-voltage shutoff||100V ±2V|
|Single Pulse Energy Dissipation||1575 Joules|
|Response Time||< 1ns|
|Protection Modes||L-N, L-G, N-G|
|Protect or Disconnect Circuitry||Yes|
|Over-voltage shutoff||135V ±2V|
|Nominal Discharge Current (UL 1449 3rd Edition)||3,000A|
|Maximum Current Rating||15A (1800W)|
|Line Voltage||120V, 50/60Hz|
|Initial Clamping Level||200V Peak, 141VRMS|
|Automatic Voltage Monitoring Circuit||Yes|
|Linear Level 3 Noise Filtration|
|-70dB min. @ 100kHz|
|-65dB min. @ 250kHz|
|-45dB min. @ 500kHz|
|Max filtration: -80dB @ 150kHz|
|Bank 2 - High Current, Low Impedance|
|-50dB min. @ 100kHz|
|-60dB min. @ 250kHz|
|-45dB min. @ 500kHz|
|Max filtration: -63dB @ 250kHz|
|Dimensions||6”l x 17”w x 1.75”h, 2.19”h with feet|
|Clamping Level||62V ± 6V @ 1 mA|
|Wires Protected||2 Wires, 1 Pair (4, 5)|
|Universal Coax Protection|
|Insertion Loss||< 0.5 dB|
|HD 1080 i/p Ready||Yes|
|Frequency Range||0 MHz - 2.2 GHz|
|Connections||Female "F", Gold Plated|