DENON PMA-A110 2-ch x 80 Watts 110th Anniversary Edition Integrated Amplifier
Free shipping
DENON PMA-A110 2-ch x 80 Watts 110th Anniversary Edition Integrated Amplifier

DENON PMA-A110 2-ch x 80 Watts 110th Anniversary Edition Integrated Amplifier

Item #: DENPMAA110
UPC #: 883795005340
Availability: IN STOCK, ships out in 1-2 Business Days. LAST ONE!
$3,999.00
$2499.00
38% off msrp
 
Item Condition:
Denon Factory Refurbished
Manufacturers Warranty:
1 Year Denon
Manufacturers Part #:
PMA-A110
Ask an expert Accessories4Less advisor
Chat
 
 

Description

Description

Enjoy enhanced stereo audio with your favorite speaker system and the Denon PMA-A110 110-Year Anniversary Edition Stereo 160W Integrated Amplifier. It outputs up to 80W per channel at 8 ohms and features a digital coaxial, three optical, and four stereo RCA inputs. One RCA input is designated for pre-amp connectivity, so you can use the PMA-A110 to drive the front speakers in your home theater system. A rear USB-B port lets your computer connect directly to the onboard DAC. The amplifier has a series of construction features designed to reduce unwanted noise, vibration, and interference for clear audio.

CLICK HERE TO VIEW OWNERS MANUAL

Twin transformer with separate coiled wires for audio and control circuits to help eliminate interference and optimize sound quality with more power

  • 110th Anniversary Audio Tuning
  • Asynchronous mode rear USB
  • Bit-perfect transmission
  • Ground isolator for DAC Mode operation
  • Wide-range amplifier
  • High-current dynamic power supply
  • Discrete power amp construction
  • Solid heat sinks
  • Source Direct & Power Amp Direct modes
  • Metal front panel
  • Auto power off
  • Detachable power cable
  • System remote function

80W per Channel at 8 Ohms

The PMA-A110 is designed to provide all the power you'll need for most bookshelf and floorstanding speakers, delivering up to 80W per channel at 8 ohms and supporting 4- to 16-ohm speakers for enhanced operational stability.

Designed to Provide a Premium Listening Experience

The PMA-A110 features aluminum feet and a double-layer steel transformer plate crafted for precision and refinement.

7th Generation Advanced UHC-MOS Single Push-Pull Circuit Design

The onboard Advanced UHC (Ultra-High Current)-MOS Single Push-Pull Circuit design combines with a differential two-stage amplifier circuit to drive nearly any speaker configuration with augmented sound quality. To enhance the balance between the delicate details of music reproduction and the vigor of low-frequency sound, the PMA-A110 can deliver a massive current output in a single push-pull configuration to drive even demanding speakers and help ensure integrity in the output stage.

High-Precision Electrical Controls

The electrical volume, balance, and tone controls of the PMA-A110 are engineered to preserve the analog feel. An MCU measures the position of the knob and converts that position to control the master volume digitally to provide a smooth, linear control of the master volume by adjusting the curve of the analog volume control in the digital world. The same configuration is used for the balance and tone controls.

Onboard USB DAC

To accurately synchronize its digital circuits, the PMA-A110 has a USB DAC that supports Hi-Res audio, up to 384 kHz / 32-bit PCM and 11.2 MHz DSD. The DAC helps suppress jitter and ensure optimal precision in D/A conversion. Additionally, the DSD transmission methods support WASAPI, ASIO native playback, and DSD Audio over PCM Frames (DoP). The DAC is designed to deliver a clean, high-grade sound.

DAC Master Clock Design

To accurately synchronize digital circuits and the four audio DACs, the Master Clock Design adopts a Dual Low Phase Noise Oscillator, which positions the master clock immediately adjacent to the DACs, suppressing jitter and ensuring optimal precision in D/A conversion. The PMA-A110 also uses a clock oscillator to dramatically reduce phase noise that can cause displacement of frequencies, plus two clock oscillators – one for each sampling frequency (44.1 and 48 kHz) – that can be switched between the frequencies to more thoroughly suppress jitter.

Digital Isolator and Pure Analog Mode

The PMA-A110 is equipped with a high-speed digital isolator circuit between the digital and analog sections to help avoid any interference from the digital circuitry in the analog section. It also features three independent power supplies to help ensure complete isolation for each section and avoid interference. When the amplifier is set to Pure Analog Mode, it turns off all the digital circuits, including the fluorescent display, to help provide clear reproduction of the analog input signal and remove any electrical disturbances that may adversely affect your listening experience.

Robust Power Supply Circuitry

Two transformers are mounted facing opposite directions in a leakage cancelling (LC) mount system to cancel mutual influences of magnetic flux, a source of noise, leaking from the transformers. The large-capacity electrolytic capacitors are used for rectification, and low-loss, low-noise, high-speed Schottky Barrier Diodes are used in the rectifier circuitry to help ensure a sufficient supply of clean current. To achieve a simple, straight circuit configuration, the connection unit between the diode unit and the block capacitor was removed. Thick OFC wiring material is used for the power line to reduce impedance.

Digital Inputs

The PMA-A110 features digital coaxial, USB Type-B, and three optical inputs for connecting nearly any source device. These digital inputs help to improve sound and visual quality of your TV audio, Blu-ray, media players, and more. You can even input high-resolution sound from an audio source on your computer, and with USB-B DAC support, the amplifier can power PCM signals up to 384 kHz / 32-bit and DSD 11.2 MHz; the digital coaxial input supports PCM up to 192 kHz / 24-bit.

TV Auto Standby

The optical and digital coaxial inputs have an auto-sensing mechanism that automatically turns the amplifier on when an audio signal is detected from an external source, like your TV.

Ultra AL32 Processing with 384 kHz / 32-Bit Support

This analog waveform reproduction technology uses data interpolation algorithms that interpolate points that should exist before and after large quantities of data to smooth out the waveform and restore some of the information that was lost during the digital recording. Carefully restoring this data helps produce detailed playback sound that's free of interference, accurately localized, expressive in the lower range, and faithful to the original sound.

MM & MC Phono Equalizer

The onboard phono input supports both MM and MC cartridges, so you can enjoy your entire vinyl collection. The equalizer is a CR type designed for enhanced stability in the high-frequency range and to produce superior sound, particularly when used with a high-quality cartridge like the DL-A110.

Pre-Amp Input

The PMA-A110 provides a fixed-gain pre-amp input, so you can pair an A/V amp with the amplifier and use the connected speakers as front speakers for your home theater.

Gold-Plated Speaker Terminals

The speaker terminals are gold-plated to help prevent corrosion over time and maintain reliable, long-term connections. Thick spades and banana plugs are also supported.

6-Block Chassis Configuration with Direct Mechanical Ground Construction

Built with an aluminum top panel, the amplifier chassis protects the signal circuits from external vibration and helps eliminate adverse effects of mutual interference among the circuits. It has six independent blocks that house the phono equalizer and input circuitry, volume control circuitry, USB-DAC circuitry, amplification circuitry, power section, and control section. With the power section at the center, aluminum feet that support the weight of the internal components, and heat sinks on both sides, the construction is well-balanced and designed to prevent unwanted vibration.

Specifications

Specifications

Amplifier
 
Configuration Stereo
Power Output 2 x 80 W @ 8 Ohms, 20 Hz to 20 kHz, 0.07% THD
2 x 160 W @ 4 Ohms, 1 kHz, 0.7% THD
Speaker Impedance 4 to 16 Ohms
Total Harmonic Distortion 0.01% (Rated Output -3 dB, 8 Ohms, 1 kHz)
Frequency Response Not Specified by Manufacturer
DAC 4x Burr Brown PCM1795 Mono-Mode DACs
384 kHz / 32-Bit
Tone Control Bass: ±8 dB @ 100 Hz
Treble: ±8 dB @ 100 kHz
   
Connectivity
 
Analog Inputs 3 x Gold-Plated Stereo RCA Pairs
1 x Gold-Plated Stereo RCA Pre-Amp Pair
1 x Gold-Plated Stereo RCA Phono (MM/MC) Pair with Ground Screw
Digital Inputs 3 x Optical TOSLINK
1 x Digital Coaxial
1 x USB Type-B (DAC)
Outputs 1 x Gold-Plated Stereo RCA Pair
1 x 1/4" / 6.35 mm Headphone (Front)
Speaker Connectors 2 x Gold-Plated Binding Post Pairs
Other Connections 1 x 1/8" / 3.5 mm IR In
1 x 1/8" / 3.5 mm IR Out
Input Sensitivity Phono MM: 2.5 mV / 47 Kilohms
Phono MC: 200 μV / 100 Ohms
RCA, Digital: 135 mV / 17 Kilohms
S/N Ratio 107 dB
Deviation RIAA: 20 Hz to 20 kHz, ±0.5 dB
   
Physical Specifications
 
Power Requirements 120 VAC, 60 Hz
Power Consumption (Active) 400 W
Power Consumption (Standby) 0.2 W
Dimensions (W x H x D) 17.1 x 7.1 x 17.7" / 434 x 182 x 450 mm
Weight 55.1 lb / 25 kg

Item Condition

Item Condition

Denon Factory Refurbished

Buying a Denon Factory Refurbished product is a great way to get "as-new" products at a considerable savings. Every product has been thoroughly tested, repaired (if necessary), cleaned and otherwise renewed to original condition. Next it is repackaged with original accessories included. When you consider that a factory-renewed Denon product undergoes such close scrutiny for defects and workmanship, you might actually be buying something that is in many ways better than new. And for your piece of mind and protection, your purchase is covered by a full 1 year parts and labor warranty valid at any authorized Denon repair center (you can look-up locations online here or call 201-762-6665)

Denon, like all electronics manufactures, receives products returned for various reasons. In 2019 consumers returned 17 billion dollars in electronics globally, of which less than 5% were found to be defective! A study revealed 65 percent of respondents decide to return non-defective electronics early on, citing frustration and/or confusion during product unboxing/unpackaging, installation, and first use. Once a product has been opened it must be resold as refurbished or open box and cannot be resold as new again. The history and reason why a product was returned is not provided to us, thus we cant provide any additional details regarding its past. All products are processed by Denon certified technicians, where they are fully tested, repaired (only if necessary), and retested again to ensure the highest quality control. Each unit must pass a complete battery of test before it can be titled a "Denon Factory Refurbished" product.

Most units are Cosmetically in Mint Condition (graded a 9 or higher on a scale of 1-10). Very minor signs of wear (light surface scuffs or minor scratches) may be present, although most units show little or no signs of any usage. We DO NOT sell products that are cosmetically damaged (cracked displays, broken knobs, heavy scratches, or physically abused) unless noted in the description. Unfortunately, we cannot provide actual photos of each unit or pick the best one for anyone, as they are all randomly chosen from our factory sealed boxes.

Extended Warranties

Extended warranties

Get extra protection for your DENON PMA-A110 2-ch x 80 Watts 110th Anniversary Edition Integrated Amplifier with a comprehensive service plan

$99.99
$159.99
$179.99

Reviews

Reviews

There are no reviews yet. Be the first to Write a Review (requires login).



Marantz Brand Logo Denon Brand Logo Bowers & Wilkins Brand Logo Yamaha Brand Logo KEF Brand Logo Focal Brand Logo Polk Audio Brand Logo Ethereal Brand Logo HEOS Brand Logo Definitive Technology Brand Logo