PIONEER Elite SW-E10 10" 300 Watt Powered Subwoofer

PIONEER Elite SW-E10 10" 300 Watt Powered Subwoofer

Item #: PIONSWE10
Availability: IN STOCK, ships out in 1-2 Business Days.
$599.99
$279.99
53% off msrp
Click for the BBB Business Review of this Electronic Equipment & Supplies - Dealers in Apopka FL
 
Item Condition:
Pioneer Factory Refurbished
Manufacturers Warranty:
1 Year
Included Accessories:
Power Cord
Manufacturers Part #:
SW-E10
Ask an expert Accessories4Less advisor
1.800.657.0195
Chat
 
 

Description

Description

The Elite Subwoofer is designed reproduce the fundamental bass frequencies so essential for conveying the weight and realism contained in dynamic music and film soundtracks. When it comes to bass that plumbs the depths, the SW-E10 has impact matched with accuracy. Elite’s 10-inch long-throw woofer is built for the task. Its 2-inch voice coil is designed for greater power handling, with a motor and suspension that allows one inch of peak-to-peak linear movement of the cone for maximum output capability.

*Sold exclusively within the US only. No shipments allowed outside the US!

The Elite Subwoofer’s down-firing driver is housed in a solid, sealed enclosure to improve transient response. Key to its powerful sound is a dedicated, built-in BASH® high-voltage amplifier delivering 300 Watts RMS of pure power, with 600 Watts peak. Coupled to this brute force is a Digital Signal Processor that ensures maximum linearity and output capability without distortion. Controls for phase- and crossover adjustment are a snap, so you enjoy bass that’s deep, satisfying and accurate, allowing for almost infinite fine-tuning when integrating the Elite Subwoofer into the main system.

  • 10" long throw woofer
  • Sealed enclosure for enhanced transient response
  • 600W peak, 300W RMS BASH high voltage amplifier
  • Digital signal processor for enhanced linearity and output capability
  • 2" voice coil
  • 1" peak to peak linear woofer movement
  • Phase and crossover adjustments
  • Designed by Andrew Jones

Specifications

Specifications

Frequency Range 30 to 150 Hz
Maximum Output Power Peak: 600 W
RMS: 300 W
Driver 10"  long throw woofer
Crossover Frequency 40 to 150 Hz (continuously adjustable)
Enclosure Type Sealed
Connectors 1 x LFE RCA input (shared with Left RCA stereo input)
1 x stereo RCA input pair
1 x AC power input
Controls Power Switch
Level (volume)
Lowpass (crossover)
Phase (0 to 180°)
Magnetically Shielded No
Finish Black vinyl
Operating Environment 41 to 95°F (5 to 35°C), <85% relative humidity
Power Requirement 100 to 240 VAC
Standby Power Consumption <0.5 W
Dimensions (H x W x D) Without Feet: 13.2 x 13.2 x 13.2"
With Feet: 13.2 x 15.4 x 13.4"
Weight 34.0 lb

Item Condition

Item Condition

Pioneer Factory Refurbished

Buying a Pioneer Factory Refurbished product is a great way to get "as-new" products at a considerable savings. Every product has been thoroughly tested, repaired (if necessary), cleaned and otherwise renewed to original condition. Next it’s repackaged with accessories included. When you consider that a factory-renewed Pioneer product undergoes such close scrutiny for defects and workmanship, you might actually be buying something that is in many ways better than new. And for your piece of mind and protection, your purchase is covered by a full 1 year parts and labor warranty valid at any authorized Pioneer repair center (you can look-up locations online here or call 844-679-5350)

Pioneer, like all electronics manufactures, receives products returned for various reasons. In 2011 consumers returned 17 billion dollars in electronics globally, of which less than 5% were found to be defective! Once a product has been opened it must be resold as refurbished and can’t be resold as new again. The history and reason why a product was returned is not provided to us, thus we can’t provide any additional details regarding its past. All products are processed by Pioneer certified technicians, where they are fully tested, repaired (only if necessary), and retested again to ensure the highest quality control. Each unit must pass a complete battery of test before it can be titled a "Pioneer Factory Refurbished" product.

Most units are Cosmetically in Mint Condition (graded a 9 or higher on a scale of 1-10). Very minor signs of wear (light surface scuffs or minor scratches) may be present, although most units show little or no signs of any usage. We DO NOT sell products that are cosmetically damaged (cracked displays, broken knobs, heavy scratches, or physically abused) unless noted in the description. Unfortunately, we can’t provide actual photos of each unit or pick the best one for anyone, as they are all randomly chosen from our factory sealed boxes.

Shipping

Shipping

Country:
State:
Zip/Postal:

Reviews

Reviews

There are no reviews yet. Be the first to Write a Review (requires login).



Mi9 Retail